Dixon Technologies is planning to accelerate manufacturing cost reductions in FY28 as it expands automation across its factories and increases investments in domestic component manufacturing. The electronics manufacturing services (EMS) company traditionally targets annual manufacturing cost savings of 7–10%, but expects automation to help it achieve deeper reductions over the coming financial year.

Pankaj Sharma, President and Chief Operating Officer of Dixon Technologies, told Moneycontrol that the company is considering more ambitious efficiency targets as it automates production processes. The strategy comes at a time when rising component prices, higher operating expenses and pressure on manufacturing margins are creating challenges for electronics manufacturers. Dixon plans to fund much of its automation investment through internal earnings rather than increasing debt.

Dixon Targets Manufacturing Cost Cuts Beyond 10% in FY28

Dixon Technologies has traditionally targeted manufacturing cost reductions of approximately 7–10% every year across its manufacturing facilities.

However, the company expects this target to become more ambitious in FY28 as automation gathers pace.

Speaking to Moneycontrol on the sidelines of the CII Partnership Summit in Visakhapatnam, Pankaj Sharma said automation would allow the company to reduce manufacturing expenses further.

He indicated that the company could potentially achieve cost savings exceeding its usual annual target. When asked whether the reduction could cross 15%, Sharma suggested that the target would be higher than the traditional range but did not commit to a specific figure.

The final level of savings will depend on the extent of automation implemented across individual manufacturing units.

For Dixon, reducing production costs is important because even relatively small improvements in manufacturing efficiency can have a meaningful impact on profitability when operating at large production volumes.

Automation Investments to Be Funded Through Internal Earnings

Although automation could reduce manufacturing expenses over the longer term, implementing new production technologies requires additional capital expenditure.

Dixon is therefore attempting to balance investment in automation with its objective of maintaining a healthy balance sheet.

Sharma said the company does not want to increase debt to finance its automation programme. Instead, it intends to use the earnings generated by its existing operations to fund these investments.

This approach could help Dixon expand production capabilities while limiting additional interest costs and financial leverage.

The strategy also reflects the company’s broader capital allocation priorities. Dixon is investing in manufacturing efficiency, component localisation and new business opportunities, all of which require funding.

By relying on internal accruals, the company aims to support these initiatives without placing excessive pressure on its balance sheet.

Smartphone Manufacturing Localisation Could Reach 35–40%

Alongside automation, Dixon is focusing on increasing domestic value addition in India’s smartphone manufacturing industry.

According to Sharma, the domestic value addition in smartphone manufacturing could increase to approximately 35–40%, compared with the current level of around 22–23%.

The improvement could come from manufacturing more components locally, particularly cameras, LCD screens and batteries.

At present, a substantial portion of the value in smartphones assembled in India comes from imported components. Expanding domestic production of these parts would allow manufacturers to capture a larger share of the product’s total manufacturing value.

Higher localisation could also reduce dependence on overseas suppliers, improve supply-chain resilience and strengthen India’s electronics manufacturing ecosystem.

For Dixon, moving beyond final assembly into component production could create additional revenue opportunities while improving its position within the electronics supply chain.

Dixon Expands Camera Module and Display Manufacturing

Dixon is increasing its presence in component manufacturing, with particular attention to camera modules and display panels.

The company is looking to increase its monthly camera-module production capacity from approximately 10 million units to nearly 20 million units as operations expand.

This would significantly increase its ability to supply components to smartphone manufacturers operating in India.

Dixon is also preparing to begin LCD production in November or December 2026, according to Sharma.

The expansion reflects a shift in the company’s business strategy. Rather than depending primarily on assembling finished electronic products, Dixon wants to manufacture a larger number of the components used in those products.

This could help the company capture more value from each device manufactured at its facilities.

Component manufacturing also creates opportunities to serve customers beyond its existing smartphone assembly operations.

Vivo Joint Venture Expected to Contribute From Q4 FY27

Dixon’s expansion plans also include its joint venture with smartphone manufacturer Vivo.

The company expects the joint venture to begin contributing to its financial performance from the fourth quarter of FY27 after receiving the required government approval.

Sharma said the agreement had already been signed and that the company was preparing to take over operations.

The partnership is expected to strengthen Dixon’s smartphone manufacturing business by adding Vivo to its customer portfolio.

It could also provide opportunities for Dixon to learn from Vivo’s manufacturing processes and apply those practices across its other Indian factories.

The joint venture is particularly important as Dixon looks to increase production volumes and expand its presence in the competitive smartphone manufacturing market.

Dixon Looks to Expand Telecom and IT Manufacturing

While smartphone manufacturing remains a major part of Dixon’s business, the company is also focusing on expanding its telecom and IT hardware operations.

These businesses provide opportunities to diversify revenue beyond mobile phone manufacturing.

Dixon has been increasing its presence in products such as laptops, tablets, telecom equipment and other electronic devices.

The company is also exploring higher-value manufacturing opportunities involving critical electronic components.

Its broader localisation strategy includes display modules, camera modules and mechanical components. These investments are intended to strengthen its manufacturing capabilities and reduce dependence on imported parts.

The company has also indicated interest in more advanced areas such as silicon photonics and optical transceivers, which are relevant to data centres, high-speed networking and artificial intelligence infrastructure.

These initiatives could help Dixon move into more specialised electronics manufacturing over time.

Why Manufacturing Cost Reduction Matters for Dixon

Dixon’s focus on automation comes at a time when the electronics manufacturing industry is facing pressure from higher input costs and changing market conditions.

The company’s Q2 FY27 results showed strong revenue growth, but operating margins remained under pressure.

Consolidated revenue increased approximately 47% year-on-year to ₹21,806 crore in the September quarter. However, operating EBITDA margin declined to approximately 2.7%, reflecting the impact of higher input costs and the expiry of the mobile production-linked incentive scheme.

Higher memory-chip prices also increased the reported value of smartphones manufactured by Dixon. However, higher selling prices do not necessarily translate into proportionate increases in manufacturing earnings.

This makes operational efficiency increasingly important.

Automation could help reduce labour-intensive processes, improve production consistency, increase output and lower manufacturing costs over time.

However, the financial benefits will depend on how quickly the company can implement the technology and generate savings relative to the additional capital expenditure.

The Bigger Picture

Dixon Technologies’ plans reflect a broader shift in India’s electronics manufacturing industry from basic assembly towards deeper domestic manufacturing and component localisation. Automation, local component production and partnerships with global brands could help Indian manufacturers improve cost competitiveness and capture a larger share of the electronics value chain.

For Dixon, the opportunity comes with execution challenges. Automation requires investment, component manufacturing involves new operational capabilities, and margin pressure remains a concern in several existing business segments. The company’s ability to generate meaningful cost savings while maintaining financial discipline will be important to the success of its FY28 strategy.

Looking Ahead

Dixon’s next phase of growth will depend on how quickly it can implement automation across its factories and expand production of components such as camera modules and displays. The expected contribution from the Vivo joint venture in Q4 FY27 could also support smartphone manufacturing volumes. Investors will be watching whether these initiatives translate into higher production efficiency, improved localisation and stronger operating margins.

The company’s ambition to move beyond its traditional 7–10% annual cost-reduction target signals a stronger focus on manufacturing productivity. However, the actual savings will depend on the scale of automation and the return generated by additional capital expenditure. If the strategy succeeds, Dixon could strengthen its manufacturing competitiveness while reducing its dependence on external funding for expansion.

Get the day’s top stories in your inbox

One concise email. No spam, unsubscribe anytime.