Tata Electronics is set to spend $5–6 billion on semiconductor manufacturing equipment for its upcoming chip fabrication plant in Dholera, Gujarat, accounting for nearly half of the project’s estimated $11 billion investment. The massive equipment spending highlights the capital-intensive nature of semiconductor manufacturing, where specialised machinery, precision technology and advanced production systems are essential to making chips at commercial scale.
The facility, being developed in partnership with Taiwan’s Powerchip Semiconductor Manufacturing Corporation (PSMC), is expected to become one of India’s most significant semiconductor manufacturing projects. Tata Electronics is also planning to use artificial intelligence to improve factory productivity, optimise equipment utilisation and strengthen manufacturing efficiency as India attempts to establish itself in the global semiconductor supply chain.
Tata Electronics to Spend $5–6 Billion on Semiconductor Equipment
Tata Electronics will invest approximately $5–6 billion in equipment for its semiconductor fabrication facility in Dholera, Gujarat. The equipment spending represents nearly half of the project’s total estimated investment of ₹91,000 crore, or approximately $11 billion.
Srinivas Sathya, president of supply chain and chief supply chain officer at Tata Electronics, disclosed the investment requirement at the Bengaluru Tech Summit.
The project is being developed in partnership with Taiwan’s PSMC, which brings semiconductor manufacturing expertise and technology to the venture.
Semiconductor fabs require highly specialised equipment for multiple manufacturing processes, including wafer preparation, deposition, lithography, etching, cleaning, inspection and testing.
Unlike conventional manufacturing facilities, a chip fabrication plant requires hundreds of interconnected processes to be performed under tightly controlled conditions. Equipment precision, reliability and production efficiency directly influence the number of usable chips produced from each wafer.
Tata’s equipment investment reflects the scale of infrastructure required to establish semiconductor manufacturing capabilities in India.
Individual Semiconductor Machines Can Cost $1–3 Million
The cost of semiconductor manufacturing equipment is among the biggest reasons chip fabrication plants require billions of dollars in capital investment.
According to Tata Electronics, individual pieces of equipment can cost between $1 million and $3 million, depending on their capabilities and manufacturing requirements.
The facility will require a large number of specialised tools operating together across different stages of production. These machines must maintain extremely precise operating conditions while handling wafers through complex manufacturing processes.
Equipment reliability is particularly important because even a small disruption in a semiconductor production line can affect output, increase costs and reduce manufacturing efficiency.
The financial implications are significant. A small improvement in equipment uptime, production yield or process efficiency can generate substantial savings when a facility operates at scale.
| Tata Electronics semiconductor project | Details |
|---|---|
| Total project investment | Approximately $11 billion |
| Equipment investment | $5–6 billion |
| Equipment share of project cost | Nearly 50% |
| Cost of individual equipment | $1–3 million |
| Planned fab capacity | Up to 50,000 wafers per month |
| Estimated annual operating cost | Around $500 million |
| Expected commercial operations | Mid-2028 |
Tata Plans to Use AI to Improve Chip Manufacturing Efficiency
Tata Electronics is looking to use artificial intelligence to improve productivity across its semiconductor manufacturing operations.
The company plans to deploy AI to monitor individual manufacturing tools, manage production processes and improve the efficiency of the overall fabrication line.
According to the presentation shared by Tata Electronics, AI-driven interventions could potentially improve manufacturing yield by 5% and equipment uptime by 5%.
Yield refers to the proportion of chips produced that meet quality and performance requirements. Higher yield means fewer defective chips and more saleable products from the same production process.
Equipment uptime measures how long machines remain operational and available for production. Improving uptime allows a fab to process more wafers without requiring additional manufacturing equipment.
For a facility costing $11 billion, even relatively small improvements in productivity can have a meaningful financial impact.
AI could help identify equipment abnormalities, predict maintenance requirements, optimise process parameters, analyse production bottlenecks and reduce downtime.
Tata believes these technologies could help India accelerate semiconductor manufacturing capabilities rather than spend decades catching up with established manufacturing hubs.
Dholera Chip Fab to Produce 50,000 Wafers Monthly
The semiconductor fabrication plant at Dholera is planned to have a capacity of up to 50,000 wafers per month.
The project is a major part of India’s effort to develop domestic semiconductor manufacturing infrastructure, which has historically depended heavily on imported chips.
The facility is expected to manufacture semiconductors for applications across industries such as automotive, industrial electronics, consumer electronics and other technology segments.
The fab is still under construction, with equipment installation expected to begin in 2027. Commercial operations are anticipated to start in mid-2028, according to timelines cited by Union Electronics and IT Minister Ashwini Vaishnaw in July.
The timeline represents a shift from Tata’s earlier target of starting operations by the end of 2026.
The project involves complex construction requirements, specialised infrastructure, cleanroom environments, power systems, water treatment and the installation of highly sensitive manufacturing equipment.
Once operational, the plant could become an important addition to India’s semiconductor manufacturing capacity.
India Faces a Shortage of Semiconductor Manufacturing Talent
Building a semiconductor fab requires more than capital and equipment. It also demands thousands of engineers, technicians, operators, maintenance specialists and workers trained in highly specialised manufacturing processes.
Tata Electronics requires more than 5,000 engineers and technicians across its semiconductor fab in Dholera and chip assembly and testing facility in Jagiroad, Assam.
The company has brought in experts from approximately 14–15 countries to support its semiconductor manufacturing operations and workforce development.
Tata is also sending young engineers to partner fabs in Taiwan for three to six months of practical training, allowing them to gain experience in real semiconductor manufacturing environments.
The company has established training collaborations with IIT Bombay, IIT Gandhinagar and IIT Guwahati, alongside partnerships with L&T and Gati Shakti Vishwavidyalaya for construction workforce training.
The semiconductor industry requires expertise across disciplines such as electronics engineering, materials science, chemical engineering, mechanical engineering, automation, industrial operations and quality control.
Developing this talent ecosystem will be essential if India wants to build multiple semiconductor fabs and chip packaging facilities over the coming years.
Tata Electronics’ Assam Chip Assembly Plant Adds Another Major Investment
Alongside the Dholera semiconductor fab, Tata Electronics is developing a ₹27,000 crore chip assembly and testing facility at Jagiroad in Assam.
The plant is expected to have the capacity to process up to 48 million chips a day.
The facility forms part of India’s semiconductor strategy, which includes both chip fabrication and assembly, testing, marking and packaging operations.
Assembly and testing facilities play an important role in the semiconductor supply chain because chips produced at fabrication plants must undergo packaging, testing and quality verification before being integrated into electronic products.
Tata’s investments in Gujarat and Assam represent different stages of semiconductor manufacturing, helping build a broader ecosystem that extends beyond wafer fabrication.
The first of the Assam facility’s two main production buildings has been completed, while construction of the second is underway.
Why Semiconductor Equipment Costs So Much
Semiconductor manufacturing equipment is expensive because it must operate at extremely high levels of precision and consistency.
Chip production involves creating microscopic structures on silicon wafers through multiple layers of processing. Manufacturing systems must maintain carefully controlled temperatures, chemical conditions, pressure, alignment and cleanliness.
The equipment also requires advanced software, sensors, automation and specialised maintenance systems.
Some semiconductor machines are capable of performing processes at extremely small scales, while others are responsible for inspecting wafers for defects that may not be visible through conventional methods.
The cost of purchasing machinery is only part of the overall expense. Semiconductor fabs also require equipment installation, calibration, maintenance, replacement components, specialised technicians and continuous upgrades.
Once operational, Tata’s Dholera facility is expected to cost approximately $500 million annually to run, highlighting the significant recurring expenses involved in semiconductor manufacturing.
The Bigger Picture
Tata Electronics’ $11 billion semiconductor fab represents a major step in India’s effort to move beyond chip imports and develop domestic manufacturing capabilities. The fact that equipment alone will account for $5–6 billion illustrates the enormous financial and technological barriers to entering the semiconductor industry.
India’s semiconductor ambitions will depend on more than government incentives and large corporate investments. Manufacturing expertise, equipment availability, workforce training, reliable infrastructure, technology partnerships and operational efficiency will all determine whether new fabs can compete successfully with established semiconductor manufacturing hubs.
Tata’s plan to incorporate AI into factory operations could become an important differentiator. If the company can improve production yield and equipment uptime, it could reduce manufacturing inefficiencies and strengthen the economics of operating a capital-intensive fab.
Looking Ahead
Tata Electronics is expected to begin moving semiconductor manufacturing equipment into the Dholera facility in 2027, with commercial operations targeted for mid-2028. The installation and commissioning process will be a critical phase because semiconductor equipment must be integrated, calibrated and tested before production can begin. The company’s ability to complete construction, recruit skilled workers and establish stable manufacturing processes will determine how smoothly the plant moves towards commercial production.
India’s broader semiconductor ecosystem is also expected to expand as additional fabrication, assembly, testing and packaging projects come online. Tata’s Dholera and Jagiroad investments could help create new supplier opportunities, manufacturing jobs, engineering capabilities and technology partnerships. If the projects achieve their planned scale, they could strengthen India’s position in the global semiconductor supply chain and reduce its dependence on imported chips over the long term.
Get the day’s top stories in your inbox
One concise email. No spam, unsubscribe anytime.



