Adani Wind has commenced production of India’s longest onshore wind turbine blades, measuring 91.2 metres, at its integrated manufacturing facility in Mundra, Gujarat. The development marks a significant milestone for India’s renewable energy manufacturing sector as the company expands its capabilities to produce larger components for next-generation wind turbines.

The manufacturing milestone comes alongside certification of Adani Wind’s MWL185-5.0 MW wind turbine platform, clearing the way for serial production. The turbine features a 185-metre rotor diameter and a hub height of 140 metres, making it one of the country’s largest onshore wind turbine designs. The project is expected to improve wind energy generation, particularly at locations with low and moderate wind speeds.

Adani Wind Begins Manufacturing 91.2-Metre Turbine Blades

Adani New Industries Limited (ANIL), a wholly owned subsidiary of Adani Enterprises Limited, has started manufacturing the 91.2-metre blades at its integrated facility in Mundra.

The blades are the longest wind turbine blades manufactured in India and have been developed specifically for the company’s MWL185-5.0 MW platform.

The new product represents an expansion of the facility’s existing manufacturing capabilities. Until now, the Mundra plant has been producing wind turbine blades measuring 78.6 metres and 80.5 metres.

Moving to 91.2-metre blades requires improvements in several areas, including materials engineering, structural design, manufacturing precision and transportation and handling capabilities.

Larger blades allow wind turbines to capture more energy by increasing the area swept by the rotor. This is particularly important for wind projects located in regions where wind speeds are not consistently high.

The development also strengthens India’s domestic ability to manufacture large wind turbine components instead of depending heavily on imported technology and equipment.

MWL185-5.0 MW Turbine Gets Certification for Serial Production

Alongside the start of blade production, Adani Wind has secured certification for its MWL185-5.0 MW wind turbine platform.

The certification was granted by WindGuard Certification GmbH, an independent German wind turbine testing and certification organisation.

The platform was developed in partnership with German technology company W2E (Wind to Energy). It underwent prototype testing at its installation site in Mundra before receiving certification.

The certification confirms conformity with the internationally recognised IEC 61400 series of standards covering wind turbine design, testing and manufacturing.

This milestone allows Adani Wind to move towards serial production of the 5 MW platform, subject to applicable regulatory and commercial requirements.

The certification is important because wind turbine manufacturers must demonstrate that their equipment meets technical and safety requirements before commercial deployment at scale.

185-Metre Rotor Covers More Than 26,600 Square Metres

One of the most significant features of the MWL185-5.0 MW platform is its 185-metre rotor diameter.

The turbine has a hub height of 140 metres, while its rotor sweeps an area of nearly 26,600 square metres.

That is equivalent to more than three-and-a-half standard football pitches.

A larger swept area allows a turbine to capture more wind energy. The amount of electricity generated also depends on wind speed, turbine capacity, operating conditions and the efficiency of the equipment.

The platform has been designed to harness varying wind speeds and improve energy capture at low- and moderate-wind locations.

This could make additional locations technically and commercially suitable for wind power projects, potentially expanding the geographical reach of India’s wind energy sector.

Higher energy capture can also improve a project’s capacity utilisation factor (CUF), which measures the actual electricity generated compared with the maximum possible output over a given period.

Why Larger Wind Turbine Blades Matter for India’s Renewable Energy Sector

India has significant wind energy potential, but the commercial viability of projects depends heavily on local wind conditions.

Traditionally, wind farms have been concentrated in regions with favourable wind resources. However, larger rotors and taller turbines can help developers access wind resources that may not be commercially attractive for smaller machines.

Longer blades increase the area through which turbines capture wind energy. Higher hub heights can also provide access to stronger and more consistent wind conditions.

For project developers, this can improve electricity generation from individual turbines and potentially reduce the number of machines required for a given project capacity.

It may also help expand wind energy deployment beyond established high-wind corridors.

Adani Wind CEO Milind Kulkarni said the production of India’s longest wind turbine blade and certification of the 5 MW platform represent an important milestone for the company and the country’s wind manufacturing sector.

He said larger blades and higher-capacity turbines can capture more energy, including at locations with lower wind speeds, helping broaden the geographical areas available for wind generation.

Adani Wind Expands Its Manufacturing and Turbine Portfolio

Adani Wind operates through Adani New Industries Limited, which is part of Adani Enterprises.

The company has developed an integrated manufacturing ecosystem at Mundra, Gujarat, with facilities supporting the production of wind turbine components and equipment.

Its portfolio includes multiple wind turbine platforms listed under the Ministry of New and Renewable Energy’s Approved List of Models and Manufacturers (ALMM-Wind).

The company is also featured in BloombergNEF’s Global Top 15 turbine manufacturers ranking for 2025, making it the only Indian wind turbine manufacturer included in that list.

Its MWL160-5.2 MW platform has crossed 2 GW in installations at Khavda, Gujarat, which is home to the world’s largest renewable energy plant.

The company has also reported that cumulative orders from independent power producers outside the Adani Group have crossed 1 GW.

These developments indicate that Adani Wind is seeking to expand beyond manufacturing equipment for projects within its own group and increase its presence among independent renewable energy developers.

Adani Plans to Expand Wind Manufacturing Capacity

Adani New Industries currently has wind manufacturing capacity of approximately 2.25 GW annually at its Mundra facility.

The company has outlined plans to increase this capacity to support growing demand for domestic wind turbines and components.

Its manufacturing ecosystem is supported by a technology centre in Rostock, Germany, and a dedicated research and development team in India.

The company is also working across different turbine platforms, with capacities ranging from 3 MW to more than 5 MW.

The expansion is taking place as India seeks to strengthen its domestic renewable energy supply chain.

Wind turbine manufacturing requires specialised capabilities across blades, towers, nacelles, generators, control systems and other critical components. Developing these capabilities domestically can reduce import dependence and improve supply-chain resilience.

Larger turbine platforms are also becoming increasingly important as renewable energy developers seek better efficiency and higher electricity generation from individual installations.

Competition in India’s Wind Energy Manufacturing Industry

Adani Wind’s latest manufacturing development comes as competition increases among domestic and international wind turbine manufacturers.

India’s wind energy sector includes established players such as Suzlon Energy and other global manufacturers operating in the domestic market.

The industry’s focus is shifting towards higher-capacity turbines, larger rotors and technologies capable of generating electricity under a wider range of wind conditions.

Manufacturers are also competing on production costs, reliability, installation timelines and long-term maintenance services.

Adani Wind’s ability to manufacture 91.2-metre blades domestically could strengthen its position in this market. However, commercial success will depend on the company’s ability to secure orders, deliver projects on schedule and maintain the performance of its turbines after installation.

Certification and manufacturing capability are important milestones, but the scale of commercial deployment will ultimately determine the platform’s contribution to the company’s business.

The Bigger Picture

Adani Wind’s latest development highlights India’s growing ambition to become a major manufacturer of advanced renewable energy equipment.

The production of 91.2-metre blades and certification of the MWL185-5.0 MW platform represent progress in domestic engineering and manufacturing capabilities.

The development is also relevant to India’s broader clean energy ambitions. Larger turbines could help improve wind energy generation at locations that were previously less commercially attractive, expanding the potential for new projects.

However, sustained growth will require competitive manufacturing costs, reliable technology, strong order pipelines and continued investment in research and development.

Looking Ahead

Adani Wind’s immediate focus will be on scaling production of the new blades and moving the certified 5 MW platform towards commercial deployment. The company’s existing manufacturing capacity, technology partnership with W2E and growing order book could support its expansion in India’s wind energy market.

The broader opportunity will depend on how quickly renewable energy developers adopt larger turbine platforms and how effectively manufacturers convert new technology into commercial projects. For India, stronger domestic manufacturing capabilities could play an important role in expanding wind power capacity and reducing dependence on imported renewable energy equipment.

Get the day’s top stories in your inbox

One concise email. No spam, unsubscribe anytime.